Social Network

  • Automatic Chemistry Analyzer

Automatic Chemistry Analyzer

·Assay methods: End Point, Kinetic, Fix time etc.
·Principle: Photoelectric colorimetry
·Light Source: Halogen lamp 12V/20W
·Photometry range: 0~3.2Abs
·Resolution: 0.0001Abs
·Wavelength: 10 wavelengths optional (340nm~800nm)
·Throughput: 300tests/hour
·Reagent tray: 59 reagent positions, 1 detergent position
·Sample tray: 71 sample positions, including detergent, standard, QC, STAT positions
·Reaction tray: 120 reaction cuvettes
·Sample volume: 2~100uL,with 0.1uL increment
·Reagent volume: R1:10~500uL, R2: 10~500uL,with 0.5uL increment
·Minimum reaction volume: 150uL
·Maximum reaction time: 10 minutes
·Water Consumption: 6L/hour under working status
·Clean unit: 8-step auto-washing system with detergent and 37℃ water
·Calibration: Calibration reset, select best test point by reaction curve, no need second calibration Line/non-line;multi-standards assay
·Control rules: Westgard multi-rule, Cumulative sum check, Twin plot 3 level controls for each ifem,analyxing and printing QC analysis diagram
·Temperature control: incubator 37±0.1℃
·Power supply: AC110/230(1±10%)V,50/60Hz,500VA
·Ambient: Operating temperature: 10~30℃
Relative humidity: ≤85%
Atmospheric pressure: 86~106kPa[Features ]
·24 hour non-stop cooling system to ensure reagent at 2-8℃
·Dual-unattached durable ceramic syringes to ensure accuracy & precision
·Collision protection in both vertical and horizontal directions, stop & alarm automatically once touching barrier, not affect former tests
·Automatic eligible cuvettes detection & selection
·Select best test point by reaction curve, create new factor automatically
·High accurate optical system
·Support LIS interface